-
I tried it today with the
rbt100 lfp12 bt
Every parameter except Charge State was shown. So it works perfectly
Thanks :)
-
Would be nice to run the top half of the Dalek (AV stuff) off of the 12V switch mode regulator @Chris3DSmith acquired; and is desirable to have the connector for this near to the back of the Dalek so …
-
Yeah, USB PD is really the way to go nowadays if you want more than 5V.
I'm using [those with a dipswitch now](https://www.aliexpress.com/item/1005004455694484.html). Works rather nicely, but it re…
-
Just tried this with the recommended Atom and Tail485. It powers on and I get "Poll Version" logs after flashing, but that's about it. Sensors are showing "unknown" in Home Assistant.
I measured th…
-
Hello,
I want to configure my OpenSource 3D printer with these following electronic parts :
Power supply 220V AC / 30A (360W) - 12V DC
Heatbed 300x300mm - 220V AC / 500W
Solid State Relay SSR-…
-
I'm running the SH-ESP32-nmea2000-gateway code on a new SH-ESP32.
I cannot send or receive CAN bus data. My lab network has an ESP32 transmitting wind data, a CYD with external CAN transceiver, and a…
-
i plan to have the rpi4 running Magic Mirror. my LCD panel is LM40SAMFHD700AG25WV.
how can i have the rpi4 running 24/7 but only have the panel On when motion is detected?
i understand the mirror'…
-
Changes to be implemented on initial design:
- [x] I: PI filter on supply input:
1. Place 2.2uF high power Filter inductor
2. Place 0.47uF 50V Filter capacitor
…
-
[f4-again.zip](https://github.com/user-attachments/files/16155156/f4-again.zip)
![image](https://github.com/rusefi/rusefi/assets/48498823/bd2d13ac-4d34-4c1e-b4d6-8c15bcfaa9d8)
![WhatsApp Ima…
-
Hi,
for some reason almost all the values stopped working.
in Appstore I see that there is no updates for more than a year.
Did the PIDs change meanwhile and I’ve to manually update them some…