-
Is there support for over the air (OTA) firmware update of devices. COMMAND_CLASS_FIRMWARE_UPDATE
I was searching [http://www.openzwave.com/dev/index.html](http://www.openzwave.com/dev/index.html) bu…
-
Still having to use my current openzwave setup because I didn't realize your program does not yet support Zwave Scene Events, and as I have 10 Aeotec MiniMotes around the house to control different de…
-
(Not sure if this is fault of OZW or qt-OZW. Feel free to redirect me to the OZW's issue tracker if this is not related to the QT wrapper)
From what I see, qt-OZW will not publish SwitchMultiLevel …
-
### Prerequisites
Danfoss LC13
### Description
This one not communicate to the zwave ,
Also calibration for local selection not there ?
-
Hi, my Yale lock seems to be generating a ton of traffic every minute and I'm not sure if it due to the app or if this is a generic behaviour of a secure node. As this is the only secure node I have i…
-
### Manufacturer
Aeotec Ltd.
### Model
MultiSensor 7
### Model ID
ZWA024
### HW Version
_No response_
### Battery Type
CR123A
### Battery Quantity
2
-
Hello, i have a ton of Aeotec Energy Meters Gen5, 3p3, 3p4, latest firmware and latest openzwave.
This is the configuration
Group 1 : 10
Group 2: 1
Group 3: 4
Group 1 time: 60
Group 2 time: …
-
because my RaZBerry is fairly fixed in place, I have a second controller in my network. An Aeotec USB Gen5 stick. Very useful because it's portable.
Usually devices include (eventually - that's a w…
-
Today, if you query the firmware update service, you will only see updates if there are firmware updates available for the device in question. When you don't see any updates, however, it's hard to kno…
-
**Is your feature request related to a problem? Please describe.**
I've acquired three Aeotec door/window sensor 6's, and I'd like to configure them in the same fashion (send X when open, monitor bat…