-
Hello everyone
@jjonkman
@bjonkman
In a previous issue #548 we discussed how to implement the new loads resulting from shifting a mass along the blade in OpenFAST/ElastoDyn. The new loads ar…
-
Hello everyone!
Using AeroDyn, we can calculate the relative wind speed and angle of attack of the determined nodes on the blades of a 5MW reference wind turbine. But if I want to know the relative w…
-
Dear developers,
Under operational-level load combinations, the existing ability of OpenFAST to consider a linear-elastic tower and transition piece, together with SSI effects represented by a 6-DO…
-
Hello, I hope you're doing well. I've run into a problem compiling software. As per the structure described, I've installed the required items. However, as shown in the picture, the term IFORT is not …
-
I'm trying to simulate the behaviour of 2 turbines with FAST.Farm, in particular the turbines are 2 identical turbines with the same characteristics of the NREL 5MW but for the tilt and the coming ang…
-
In addition to exploring off the shelf 12VDC pump motors, it seems worth recreating a CPAP setup with 3D printed/off the shelf parts. Mark Rehorst's [printable blower](https://drmrehorst.blogspot.com/…
-
貼吧活動:(請查閱 [SARS-CoV-2 Timeline by 2020.02.21](https://github.com/agorahub/_meta/blob/agoran/theagora/sari/Memorandum_2020-02-21_SARS-CoV-2-Timeline_Nathan.pdf?raw=true), by Nathan :cloud: )
- Colla…
-
Hi all, so yesterday I piloted a 1977 Cessna 172N, upgraded to 172P (Engine replaced), in real life.
### Important Observations
- About the Cessna 172 in real life. Man, in real life, it is an abs…
Megaf updated
3 years ago
-
We implemented HydPy-Evap-MORSIM as discussed in #111. There is still room for minor technical improvements, but the model's "hydrological functioning" is clear now. We see a marked overprediction …
-
## Description
Parallel computation using mpiexec is not running if pyGeo is imported
### Steps to reproduce the issue
1. Create a sample file for parallel executions:
#hello.py
from m…