-
**Describe the bug**
When viewed in the TP-Link Smart Plug control window, the graph shows the Current and Power usage (with history). The Amperage is incorrect as it reports approximately 1 A, with …
-
Add code for checking battery state.
Also add a warning when battery is low?
-
Implement some "for dummies" information.
ELN1 had some honestly lacking knowledge base about it. A lot of things didn't even have wiki entries.
Also; not everyone knows everything about electr…
-
Currently, the current sensor settings are located within Configurator's general "Configuraton" settings tab, which has a 'save & reboot' button in order to save the settings. This causes the current …
csurf updated
4 years ago
-
Using 5160 with SKR 1.3 and SKR 1.1 Pro I had to cut timer pin and solder timer to ground to avoid timer overrun errors. Is this problem solved with GTR and M5 boards - or do I need to do the old work…
-
A useful feature for energy monitoring devices would be a power threshold (in watts) set from the web UI (and of course WS, MQTT, telnet) over which the switch disconnects.
This would be a form of …
-
Design the circuits on KiCAD to find a way to keep an organized circuit on the shake table. The other idea is to implement any new features that may help with the circuit design or reduce the clutter.…
-
[MotorList.docx](https://github.com/MTechNRMC/2017NRMC_ControlServer/files/856681/MotorList.docx)
-
I have 4 mss310 configured. Previously using them with merosss app and cloud. Unpaired them and paired to local addon using Custom Pairer app. Went fine and flawlessly, 4 devices added and 4 are capab…
-
@kanflo @Xenoamor
As the title suggests, is there a way to use the DP50V5A as a constant current source LED driver?
In its current state, when I set the voltage to about 7V and set the current li…