-
Hi,
Set up a spare Raspberry PI Pico as a Picoprobe (as described in https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf Chapter A) and tried to upload a sketch using a programmer…
-
### Describe the problem
In order to make it easier for beginners to get started with writing Arduino sketches, and for the convenience of all users, Arduino CLI [automatically generates and adds p…
-
### Describe the problem
Compiling the following blink sketch for ESP32 board:
```C++
#ifdef __cplusplus
extern "C"
{
#endif
void dummy(void) {}
#ifdef __cplusplus
}
#endif
void s…
-
I have seen this problem on 2 macs now for a pair of students i tutor.
The tirst one was …
-
In file included from /Users/mymac/Documents/Arduino/libraries/AIS_4G_board/src/AzureIoTHub.h:5,
from /Users/mymac/Documents/Arduino/libraries/AIS_4G_board/src/AzureIoTHub.cpp:1:
/U…
-
### Description of defect
Upon running the Commander.py script, the `cobs.cobs.DecodeError: not enough input bytes for length code` error is displayed.
```
PS D:\Github\aliphys\nicla-se…
-
I have an arduino-cli installed at some `path/to/arduino-cli/arduino-cli.exe`.
I also have a `arduino-cli.yaml` in `%LOCALAPPDATA%/Arduino15/`. This folder is empty except for the `arduino-cli.yaml`.…
-
There is a one second delay after finding the new port (after the touch_1200 reset). The comment says it is needed for OS X. On Linux, I find that 95% of the time the boot loader has already timed o…
-
**Depending on the board or MCU** you use, the IDE will either **freeze or** take way too long to **compile**. *(At least with [this build of the old-Arduino](https://archlinux.org/packages/extra/x86_…
-
Hello.
Ubuntu 22.04 LTS on Raspberry Pi 4.
```
$ uname -i -m
aarch64 aarch64
```
```
$ sudo apt-get install arduino-cli
arduino-cli 0.29.0 from manchoz installed
$ arduino-cli
/snap/ardu…