-
Positive đź‘Ť
Got it working on Pro Micro Clone with 3.3V @8MHz & 5V @16MHz
- install and identify Pro Micro 3.3V @8MHz by board manager (see SparkFun Docs) to get correct bootloader
- or as Leonardo…
-
Not sure where the DigisparkCDC project "lives", so posting this here.
I keep getting (lots of) "BOGUS urb xfer, pipe 3 != type 1" in dmesg on Linux.
When running the `DigisparkCDC > Print` sketch, t…
-
Hello,
I recently wanted to use a joystick for my robot arm to control a XL320, it's working perfectly but when I modify the code to make it move in reverse nothing is happening. I really don't under…
-
When using an Arduino Mega 2560 R3 is connected to a Raspberry Pi running the U-Boot boot loader, it crashes the boot loader during USB enumeration:
```
Starting the controller
USB XHCI 1.00
sca…
-
I've tried:
```
/usr/share/arduino/libraries/
~/sketchbook/libraries/
```
and the project's `lib` directory.
None of these seemed to work for me. I am getting the following error:
``` bash
$ ino b…
-
Using Arduino IDE 1.6.10/Arduino AVR Boards 1.6.12 with Windows 7 64 bit and 32 bit
With libusb-win32 v1.2.6.0 driver installed for USBasp:
1. Tools > Board > Arduino/Genuino Uno
2. Tools > Programme…
-
### Issue description
Unable to build MK4Duo without LCD.
### Firmware version
MK4duo 4.4
### My setup
RUMBA32 with 6x TMC5160
Delta with sensorless homing and sensorless endstops
NO LCD…
-
Compilers and plugin are bugged.
Just installed SAM board
```
./arduino --install-boards arduino:sam
```
Downloaded arduino-1.8.7
```
# Arduino Due uses SAM3X8E SAM chip
BOARD_TAG = ardu…
-
I've been trying to implement a `Usart` type for ATtiny167 and have been running into typing hell trying to do that.
The `avr-hal-generic` crate currently contains the `Baudrate` struct that comput…
-
this help?
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-b…