-
进入AfterEffectActivity后无法播放并导致ANR
-
Thanks for the repo @rahul-thakoor However, in my case the camera is still not being detected. Do you have any idea what might be the issue? I'm using RPi 4 with balenaOS 2.94.4|supervisor 12.11.36…
-
I tried running the following from the command line based off of `
```
/usr/bin/camera-streamer -camera-path=/base/axi/pcie@120000/rp1/i2c@88000/imx708@1a --camera-type=libcamera --camera-format=YUY…
-
When testing out the camera I get some errors in kernel log. I am working with 5.11
I have an ov4689 connected to CSI1
```bash
media-ctl --device /dev/media2 --reset
media-ctl --device /dev/me…
-
For official HQ camera the camera properties report "RGGB" Bayer pattern (ColorFilterArrangement 0). The format names for the raw modes also start with "SRGGB". But HQ camera seems to have BGGR Bayer …
-
# Problem Report
## Describe the Issue
I tested Raspberry Pi 4 with Raspberry Pi v2 camera and OpenPnP running on 64-bit version of Raspberry Pi OS and I can add new OpenPnpCaptureCamera, but I´m no…
-
I've been looking into this with the Raspberry Pi guys, to see what we can do to fix the latency issues you report so you don't need the manual configuration of the ISP.
It may be that we could add…
-
It is ideal if the JH7100 video and camera input (CSI + ISP) are able to be supported by libcamera
https://libcamera.org/
@kbingham can assist with but coordination with StarFive engineers is needed…
-
Expected result: Able to change resolution to "12MP", "4K", "1080P"
Result: Can only get 720P
Branch: v2.8.2-humble-12-g48fd970.
Launchfile: camera.launch.py (depthai_ros_driver)
I am using this…
-
This is with latest openwebrtc from master. With 0.3 release it works fine on the same device.
It seems like the camera itself works and captures but the output is not rendered correctly. The followi…