-
CANBUSによって、さらに配線がシンプルになるようです。
https://discuss.ardupilot.org/t/canbus-for-ardupilot-with-uavcan-and-uc4h/37021
動画
https://youtu.be/Y60CY4Yoc9A
-
Currently struggling with the canbus output on the M8P. At this point, I am planning on getting a U2C and using the M8P as just the main board. Whenever I follow the guide, it seems like the Canbus Kl…
-
hey there,
I am using the ESP32 internal CAN Controller (https://esphome.io/components/canbus.html?highlight=can#esp32-can-component).
could you also "elegantly integrate" a variant for this?
…
-
Hi, I'm a noob here. Starting to learn some Qt and notejs programming.. I wanted to add some car settings using a GUI with socketcan. How to go about doing this and blend well with openDash system and…
-
This isn't directly related to the audio part of this project, but is kind of adjacent , hopefully that's ok.
While you were working on this, did you find a reference/guide for other information t…
-
*marconi:*
It would be nice to add the CANbus driver : kernel/drivers/net/can/usb/gs_usb
FYI / motivation : there are few new inexpensive USB to CANbus devices that use this driver, such as :
…
-
Hey all - Does anyone know the proper syntax to read and then send data to individual bits of an address id byte ?
Thank you!
-
Hey, I have the ebb sb2240 with a different cable shape than the one advertised (came in the box) and the STL doesn't fit around the connection,
Cheers
-
On the M8P V2 pinout diagram the canbus pins are marked as TX and RX. This is the wrong protocol and and does not translate to over to canbus High and Low.
Recommend to update pinout and add schem…
-
# version
Build information:
version 7.4.5
PySide6 6.6.0
CPython 3.12.4 x64
# Description
I have a record file that contains canbus errors (just temporary short H and L), from the GUI I can …