-
Proto file:
```
message BadRegexTestMessage {
uint64 ds18b20_serial_code = 1;
}
```
Result:
```
class BadRegexTestMessage(betterproto.Message):
ds18_b20_serial_code: int = betterp…
-
![Graph 1](https://github.com/thorrak/brewpi-esp8266/assets/13153804/4523b583-32fc-4851-b735-c53dbf89a814)
![Graph 2](https://github.com/thorrak/brewpi-esp8266/assets/13153804/c73a7032-3fcf-48ea-8d…
-
#134
Hello
Could you make the PR to show how you solved your task?
I think that boolean parameters at the configuration portal will be useful for others. Yeas, we have an ability to add custom html…
-
It's probably my fault, but I thought I would ask anyway.
Is it possible to read a DS18B20 using pin 10? I keep getting a -55C reading, whereas I should be getting ~20C.
I am using passive po…
-
ERROR: undefined reference to `DS18B20_read(unsigned char)'
my code:
#include
#include
#include
#include "ds18b20.h"
//Pinos
#define PIN_SENSOR_TEMPERATURA PB2
#define PIN_COMPRESSOR …
-
I'm trying to connect this temperature sensor but have no luck. I tried with 4.7k resistor and without. The same sensor with the same wires connected to Arduino works well, so it's not a wiring issue.…
-
`/*-----------------------------------------------------------------------`
Pinguino example to read ds18b20 1wire temperature sensor
Result is sent on usb-serial bus and can be read with index.ph…
-
My set-up consists of:
DS011
OLED SSD1306
DS18B20
BME280
The OLED currently limits to four displays, e.g. Device Info, SDS011, BMP/E280, WiFi Info. If I exclude the BMP/E280 device, the DS18B20…
-
Hello,
these days I started a project with ESP8266 and temperature sensor DS18B20 . I used 4 sensors on one wire) and I was very disappointed about the behaviour. After some hours all 4 sensors provi…
-
The junction temperature is being reported as 10C after installing the DS18S20. I did not see the DS18B20 at Digikey. I installed this:
https://www.digikey.com/product-detail/en/maxim-integrated/DS…