-
Hi,
I'm trying to poll my Wolf heater, but it seems that config fails to load:
The config is cloned from the repo (ebusd-2.x.x/de folder) to local folder and it is set in EBUSD_OPTS
--scanconfi…
-
Ich habe eine AuroCompact Heizung von Vaillant.
Besteht dort die Möglichkeit die 1xSpeicherladung zu aktivieren?
Hier zur Info:
version: ebusd 3.3.v3.3-40-gd9d1b9a
update check: version 3.4 a…
-
Pairing is technically only a process for the two devices to be allowed to talk to each other. The UX for any user without this technical understanding has no idea about this, its implications and res…
-
Hi John! First of all thanks for the great job with all the ebus stuff made available to enthusiasts!
**Issue description:**
I've just tried testing if a heating hardware fault could be detected v…
-
When using e.g. VR32 for connecting one eBUS to another and providing access to a single device in the second bus on a dedicated address on the first bus, the communication timing is no longer specifi…
-
### Description
I use ebusd's MQTT output in JSON format, so I get the following result when querying the heating time slots:
To set these values I have to use the format which is also require…
-
I have created a new file for vSMART configuration (Netatmo device)
>address 10: master #2
>address 15: slave #2, scanned "MF=Vaillant;ID=SCC00;SW=0500;HW=3903", loaded "vaillant/15.scc.csv"
…
-
Hallo,
ich habe leider gröbere Probleme mit meiner Vaillant Therme. atmoTEC plus VCW AT 174/4-5-H. Es ist am Ebus noch ein Thermostat Calormatic 370.
Die Reparaturkosten übersteigen nun schon …
-
Hi is there a possibility to tchange the water Heating mode from Normal to Eco via homeassistant/mqtt?
currently i am unable to read/write the according property. I would like to switch the water hea…
-
Hello everyone,
i would like to control my Solar storage charge controller PS 5511 SZ. It has an interface eBus.
My questions are:
1 could I use this eBus?
2 Do you have experience with this…