-
### Assignee
@andrew-aj
### Deadline
_No response_
### What needs to change?
From the VRX manual:
> **Capability:**
Given multiple docking bays (similar to the arrangement in the RobotX Chall…
-
Closing [#126](https://github.com/revk/ESP32-Faikin/issues/126) to start again as far too long - let's start again.
# Where are we?
We have details of low level timings and codings, and dumps of…
-
I want use drawio to draw electrical plans, but the default available symbol-libs are very bad (missing symbols, bad grid dimenssions, ...).
So i try to build my own shapes based on the documentati…
-
This thread collects declaration of participation to the [Ten Years Reproducibility Challenge](https://rescience.github.io/ten-years/). You can add your own declaration by adding the article your targ…
-
I am trying to solve this system of ODEs
```
from sympy import *
RC, t, C, Vs, L, R1, V0, I0 = symbols("RC t C Vs L R1 V0 I0")
V= Function("V")
I = Function("I")
system = [Eq(V(t).diff(t), -1/…
-
Hi,
Firstly, thanks for the fantastic rtl_433 tooling. Amazing work!
I'm trying to add support for a kinetic-powered switch, which is typically 'paired' via RF to one or more receivers such as S…
-
Hello @juulsA !
Is it possible to process and output to json not only lines but also shapes that are drawn at silkscreen layers?
Is it possible to include BOARD GEOMETRY/SILKSCREEN_TOP
BOARD GE…
-
### Schematic stuff
- [x] 1. For USB the general rule is to connect the shield to ground on the host side and leave floating or AC couple on the device side. Good explaination as to why [here](http…
-
The model Modelica.Electric.Ideal.IdealGTOThyristor implements a behaviour that is not only of GTOs, but of a large variety of electronic switches: BJTs, FETs, Mosfets, IGBTs, IGCTs, GTOs (moreover, G…
-
## Why?
It's hard to work with quantities (value + UoM) in RDF and SPARQL.
There are about 10 UoM ontologies:
- the worse of them are just a list of units
- the better of them also add dimensi…