-
Hello,
I’ve successfully connected an Eglo smart bulb with my ESP32. I also have a couple of Bluetooth motion sensors, but they don’t seem to display in the MQTT integration as the bulb does.
I …
-
### Platform
ESP32
### Assembly
I did the assembly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
circuit board
### Power Stabilization
nothing
### Connection picture
- [ ] I wil…
-
This ticket is to investigate seemingly random reboots of the controller (often related to also losing WIFI STA) with latest firmware version [Release-2023-12-27-12-02](https://github.com/stuartpittaw…
-
Hello,
in past i wrote private lib based on BlueMagic32 (but used only the connection part) to create bridge between BLE and Websocket.
My target was very simple, pass all data (including connecti…
-
I was wondering if there is already a way implemented to seperate MQTT client from ESP-Now controller, so that I can build the gateway from two seperate esp's. That way the ESP-Now network can use it'…
-
Sorry, no way to contact you directly except via an issue ticket ;-)
Thanks for reverse engineering the inverter. Works like a charm.
However the "main" code seems to freeze.
* I think **whi…
-
Betreibe das Teil an einem Deye Inverter. Signalqualität über 90% bzw. -53dB
Habe das merkwürdige Problem, dass nach 1-2 Wochen irgendwann keine Daten mehr per MQTT kommen.
Versucht man aufs Webinte…
-
### Description
On transmission of data enqueued for sending in the outbox in `mqtt_resend_queued`, a failure of `esp_mqtt_write` will cause an MQTT disconnection. This can interrupt a devices uptime…
-
Hello,
I'm using an ESP-01 with esp_wifi_repeater in order to expand my WiFi to my garden.
The architecture is quite simple :
1/ the head of my network is a BananaPI under Gentoo which is running…
-
It's nice, but it presently uses a ESP32 coded with TASMOTA, and a serial link to an Arduino.
I think the entire functionality could be ported to the ESP32. Unfortunately, we'd lose some of the nice …