-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
The interrupt for AT character detection doesn't ever seem to fire for me.
UART setup:
```
let config = UartConfig {
baudrate: 115200,
data_bits: DataBits::DataBits8,
p…
-
I enjoy using this library but the performance of drawing could be improved. In stead of drawing directly to the display, I suggest drawing to a memory frame buffer and then sending the frame buffer t…
-
### PROBLEM DESCRIPTION
Compiling for tasmota32 & tasmota32c3 & tasmota32c6 & tasmota32s3:
```
|-- Wire @ 2.0.0
|-- XPT2046_Touchscreen
Building in release mode
Compiling .pio\build\tasmot…
-
I use spi connect `max31865` do pt100 temperature measurement,the `clk` needs to pull up resistors,or touch `clk` with hand,or hang `clk` on the oscilloscope probe...must select a, Otherwise, it's not…
-
The #[interrupt] macro has been removed from esp-hal-procmacros as of Apr 9, 2024.
Please see the associated pull request for more information:
- https://github.com/esp-rs/esp-hal/pull/1409
I n…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
The port print rate for the ESP32C2 defaults to 74880 instead of the usual 115200. After Cargo Run downloads, it will be garbled when it starts printing, and the default frame rate of espflash monitor…
-
Since commit `2440c240ced0862bbe4472581dd4c08006bc8512` this example doesn't work anymore for ESP32:
```rust
//! Turns on LED with the option to change LED intensity depending on `duty`
//! value…