-
**Is your feature request related to a problem? Please describe.**
When I use the Hardware Showcase Wallpaper, my ethernet controller is displayed at the right bottom. However, I don't use Ethernet, …
-
Hi,
I'm trying to use the Zephyr DHCPv4 sample with an ESP32-WROOM and the W5500 Ethernet shield. I have added the specific overlay and configuration files to the project. These are similar to the Ac…
-
Hi, First of all, thanks a lot for these wonderful kernel and builds.
**Device**: NanoPi R6C
**Issue**: This device has 2 ethernet ports(1G and 2.5G), upon connecting to any router using the 1G po…
-
Hi
When deploying k3s via EIB, k3s will not start if there is no ethernet cable plugged in into the device.
This results in:
```
[FAILED] Failed to start Network Manager Wait Online.
[FAILED] F…
-
The need is to enable and define the compression of the Ethernet Header data on top of a Radio Link.
A new attribute could be added to RLT interface:
-- rw header-compression-mode
-
### Testing environment:
iroh-net version: v0.27.0
server (Linux, Windows),
client (Windows).
client is a laptop that supports both Wi-Fi and Ethernet connections.
### Result
1. When…
-
### Question
Building failed with error:
```
Undefined symbols for architecture x86_64:
"_slirp_add_hostfwd", referenced from:
SlirpEthernetConnection::SetupPortForwards(bool, std::__1::b…
-
### Answers checklist.
- [X] I have read the documentation of the component in question and the issue is not addressed there.
- [X] I have searched the issue tracker for a similar issue and not found…
-
Is it normal or abnormal for the network port team `roundrobin` mode to bind ports that are not connected to the network cable to cause a decrease in traffic? （at libteam1.31~1.32）
for example（use …
-
Hi everyone,
I noticed that tcpdump returns nothing when I apply upper layer protocols filtering expressions while reading (-r) previously saved files that contain 802.1Q headers. However, if I sta…