-
1 - `sudo chmod +x install_wm8960.sh`
2 - `sudo bash install_wm8960.sh`
https://github.com/ubopod/ubo-sdk/blob/main/system/setup/install_wm8960.sh
replace seeedstudio driver with this. Tested o…
-
I have update to openwrt according to the guide, but there seems to be a significant wireless problem. There is no any wireless infomation in overview or network tab. And there is no /etc/config/wire…
-
Hi install last version r3 .. but every 6 hour my modem resting.. pls help me
-
### 详细叙述
拉取最新源码，5.15内核，一直编译失败。网络问题已排除
### 重复 issue
- [X] 没有类似的 issue
### 具体型号
H3C NX30 Pro
### 详细日志
CC lib/rhashtable.o
CC drivers/mtd/nand/mtk_bmt.o
CC drivers/net/phy/r…
-
### Describe the bug
- Add support for omap for kernel 5.15.
- [ ] check if CONFIG_RESET_TI_SYSCON should be built
## Bugs to kernel 5.15:
The eth0 interface can't be added to the br-lan defau…
-
RPi 4B with
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 20.04.6 LTS
Release: 20.04
Codename: focal
Followed the instructions at https://docs.arducam.com/Raspberry-P…
-
@lynxis
I use Mikrotik wAP R AC with R11e-LTE modem, also tested with R11e-LTE6 modem. The log is full of:
```Thu Dec 1 00:54:45 2022 kern.err kernel: [ 177.542160] usb usb2-port1: Cannot enabl…
-
我误把桥接端口删，尝试用ttl刷机，但是遇到一些问题。
问题一如下所示：
##### The CPU freq = 580 MHZ ####
estimate memory 8 Mbytes
Poose the operation:
1: Load system code to SDRAM via TFTP. Load system code then write …
-
Hey,
i am not sure if this is a bug or false usage but here is my code:
```
def establish_subscription(self):
try:
xpath = "/ip-sla-ios-xe-oper:ip-sla-stats/sla-oper-entry"
…
-
### Describe the bug
The device stops in the bootloader after running the reboot command 10-20 times.
### OpenWrt version
23.05.0-rc3
### OpenWrt release
r23389-5deed175a5
### OpenW…