-
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when I use an Electronic Speed Controller to contr…
-
I have succesfully prototyped and tested an ESP with Arduino and a 433MHz transmitter to control my 'dumb' fan.
Controlled with Sinric and google home.
My fan has 6 fan speeds, thus, I cannot co…
-
Note that I do have the kernel parameter`amdgpu.ppfeaturemask=0xffffffff`.
![image](https://github.com/ilya-zlobintsev/LACT/assets/53740368/10c1c290-40f3-4c09-8027-ca835cd74c91)
- Fan speed always…
-
I have 9 fans connected to my controller as follows:
Ch#1: 3 fans
Ch#2: 3 fans
Ch#3: 2 fans
Ch#4: 1 fan
I can pair correctly Channels # 1 to # 3 m but I get an error message on Ch#4 that the …
-
### Is your feature request related to a problem? Please describe.
I'd like to be able to control the speed of the mainboard fans that some boards like the SKR Mini E3 v3 are able to adjust.
#…
Deses updated
1 month ago
-
This looks pretty good.
Wasn't sure the best way to provide some feedback, so figured I'd just open an issue... I've been looking into building something similar but perhaps 8 fans and using an es…
-
Hi, I am currently working on integrating multical modbus and cane across your repo. Would it be possible to share the https://github.com/AllexVeldman/esphome-multicalor repo as well, since that would…
-
Hi Michael,
I just upgraded to this addon from the origin integration in HA. I use an automation inside HA to control the speed of the fan. After 2 hours the fan speed is still set back to the orig…
-
Is this only to add the option to monitor liquid temps and adjusting the pump speeds?
or am I missing to see the option for fan controls as well?
-
1.42.0 b2 win64
There is settings for fan speed general and for bridges and overhangs. It would be nice to control fan speed for support interface as well.
If I turn off the fan for the printed…