-
Hello,
We are facing a _ksz8851ProcessInterrupt: serious error_ using KUNBUS DeviceNet Gateway.
In /var/log/kern.log, we have the following entries (and both Power and MS LEDs turn flashing red) …
-
**Question**:
How can I deploy Portainer on... ?
-
# Summary
When launching `ur_control.launch` as shown [here](https://github.com/PickNikRobotics/picknik_ur5_moveit_config/blob/master/launch/ur5_oem_driver_bringup.launch.xml), the process dies wit…
-
_NOTE: I am [reposting my forum post](https://forum.beagleboard.org/t/l2-cache-flushing-due-to-starfive-7100-architecture/29197) here for greater visibility._
The BeagleV beta boards have the StarF…
-
Nodejs 8.x LTS is almost at the end of the life-cycle. I tried to update the project to Nodejs 12.x but the compiled binary [fieldbus.node](https://github.com/HilscherAutomation/netPI-nodered-fieldbus…
-
I planed to set up an UR3e inorder to use the python Move-comander for some fairly basic robot scripting. (A first prove of concept before moving on to more complex tasks)
I have installed the cu…
-
I have been playing around with this SOEM library and managed to quite easily set up a network of slaves, reading and writing data via IOmap. Each slave has a separate area of memory in the IOmap and…
-
im using nixos nixos-unstable@916ee862e87 and nixpkgs-wayland overlay @ https://github.com/colemickens/nixpkgs-wayland/tree/fff3832d082ccc20447173fc8d75aebff94469ec
when i run sway the screen stays…
-
We are using a BeagleBone Black that started w/ Debian 8.6 2016 11-06 .
The uEnv.txt was modified to include:
cape_enable=bone_capemgr.enable_partno=BB-SPIDEV1
After rebooting, I am able to see my …
-
Dear @jhillacre , @dresende , @jacobq , @buffcode , @insideGen
I am working on a proprietary protocol translator from /to modbus.
I need to discover all the modbus device master/slave and get t…