-
Hello, will there also be a manual for the Adventurer 5m/ 5m Pro. can you get any help with this? I have a 5m and can help/ test.
-
(Note: skip or read all the way to my third reply before replying.)
When I create a ff_creatorx-2560 build from the current master, it works, but exhibits very noticeable stuttering every time an M…
-
### Description
1. DEFAULT_AXIS_STEPS_PER_UNIT gives a redefined warning
2. Compiling with -g (USE_MKS_UI) fails
### Reproduction steps
1. DEFAULT_AXIS_STEPS_PER_UNIT warning happens with al…
-
### OrcaSlicer Version
All
### OS version
All
### Additional system information
N/A
### Printer
All
### How to reproduce
N/A
### Actual results
N/A
### Expected results
N/A
### Project f…
-
See the comment below for some more reference:
https://github.com/foosel/OctoPrint/issues/2529#issuecomment-377633452
I have a FlashForge Creator Pro 2016 that was working perfectly under Octoprin…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.1.0-alpha
### Operating System (OS)
Windows
### OS Version
Win 11
### Additi…
-
Hi and first of all thank you for this tool!
As mentioned in the issue below I also don't have actual progress data - cam, Temps, status works great, but printing progress is always "0%".
Is there …
-
### Cura Version
5.5.0
### Operating System
Windows 10
### Printer
Flashforge Creator 3 V2
### Reproduction steps
The infill llines are not on top of each other if "Connect Infill lines" is che…
-
Hi,
I have a Flashforge Dreamer that is only a couple of months old that I wanted to use with Cura hence the use of this fantastic firmware update.
All functions work apart from part cooling. I ca…
-
Hi there,
After playing around with GPX and setting up a serial connection to my FlashForge Creator Pro it seems that it only executes the first command.
here's an example:
```
// test.gcode
M70 P5…