-
Hello I have a problem again. The board arrived and I got it working. I did calibrate the Z endstop and the probe everything was working fine. I did change the fan connection to PB2-24v 2x controller …
-
Can you upload newer firmware , then the one in clone board?
(prusa3d_fw_MK3S_3_9_3_3556.hex)
thx
-
Hi,
I'm the owner of a MKS Robin v2.2, which runs Marlin 2.0.x without hassle since a while. However, i have some serious issues with the bootloader. In fact it tends to display or not a "SDERRng" me…
-
I am using Klipper firmware.
Only the motor inserted in z works. I tried different ports, the motors do not spin in any port
![20220204_190339](https://user-images.githubusercontent.com/22075591/152…
-
Hello
I got the PIS installed and everything works fine.
But when i remove the PIS and reboot Klipper, it wont Boot and an Error shows "Not able to connect to MCU" or something.
Does the PIS no…
-
I have purchased 2 spider 1.0 boards, both having the same 3.3v issue with stepper drivers plugged in. Initially, I could not figure out why the SD would not flash with a firmware.bin in the root dire…
-
Unable to build with platformio.
Error promted
> Executing task in folder Marlin-2.0.x-SKR-Mini-E3-v1.2: platformio run <
Error: Unknown environment names 'BOARD_BIGTREE_SKR_MINI'. Valid names…
-
### Requested feature:
Upgrade Klipper for multiple controllers. Printers can have multiple controllers. For example, I have three for my printer: Fysetc Spider, Huvud CAN and Raspberry Pi host. T…
-
Hi,
I'm at the moment trying to get my Voron running.
I've got the Spider v2.2 with 7 TMC 2209 v3.1 drivers installed.
I installed every jumper as shown in the instruction.
I Already tried to …
-
This issue will automatically convert a Grbl_Esp32 "machine.h" file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
Attach your M…