-
It appears that when the buildbotics generates both the gcode warnings and 3d view it ignores any G53 Machine position moves, e.g. “G53 G0 Z150 “ and treats them as starting from the work coordinate o…
-
### Description of the bug
Regardless of the support type used, interface layers on supports appears in the momentary preview that occurs before it generates the final view with the 'Feature Type' co…
-
Please consider storing the zoom, location, rotation, etc., along with the prefs.
The issue is, when OctoPrint is reloaded, it loses all this (even during the same print), so I have to re-zoom, re-…
-
Hey,did anyway to put a web page on the screen?
I know how to put picture on screen and also text/Button.
But I didn't found a way to put website (like nodejs gcode viewer) on screen and show it.
…
-
When you open a gcode file in Prusa's g-code viewer, the viewer keeps the file as locked/being use for file system (in Windows). This means you are not able to modify a file as it is being viewed in P…
-
**_Edit: 3/20/2018_** ***********************
this is/was a bug with slic3r. I have not tested this again since i filed this report. it doesn't happen with cura.
perhaps i wrote the wrong title f…
-
### What happened?
I change the `Brim & Skirt` under the `Print Settings` and `Speed`, yet it seems no matter what I put there it still just uses 50% of `Support Speed`.
### Project file & How to re…
-
Visualcam on Firefox works nice. The UI is pretty intuitive. I've seen the gcode generated by VisualCam on webgcode viewer correctly.
Is there any online manual of VisualCam ?
-
Steps to reproduce:
1. Open Pronterface with a G-Code file: `pronterface my-file.gcode`
2. Navigate layers using “U” and “D” keys
3. Navigate layers using up and down cursor keys
4. Try …
-
I was trying to generate speed test tower for my printer, set parameters as needed. Since there are no Generate button, I expect Download Gcode button will output generated file. Checking thru the gco…