supermerill SuperSlicer issues

supermerill / SuperSlicer

G-code generator for 3D printers (Prusa, Voron, Creality, etc.)

4.03k stars 516 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Negative space scaling/rotating

#4331 sprior opened 2 days ago
0
Thin walls bug/issue - inconsistent slicing and thin walls width too small

#4330 pajtaz opened 2 days ago
0
Port OrcaSlicer's Small Area Infill Flow Compensation

#4329 TheSlashEffect opened 4 days ago
2
allow overriding instance or part settings with entire profile

#4328 Tirpitz93 opened 4 days ago
0
Ignoring seams and locating them on overhangs

#4327 3Mistakes opened 4 days ago
0
Corrupt gcode file

#4326 Fuechsl closed 4 days ago
1
Sinusoidal truss infill

#4325 laukejas opened 1 week ago
0
"No perimeters on bridge areas" setting and arachne

#4324 thisloginalsotaken opened 1 week ago
0
Internal bridge infill AND Solid infill not touching perimeter due to above layers

#4322 Arthur-de-Partuur opened 1 week ago
0
Add the ability to split a g-code file from inside the g-code viewer application.

#4320 Nbeknel opened 1 week ago
3
Display problem with wipe inside at start

#4319 CuredPrusa opened 1 week ago
1
Merging a merged object with another object changes the rotation state of a part of the original object

#4318 Icenowy closed 1 week ago
2
Slicing crashes on latest 2.5.59.11 version

#4316 HitLuca closed 1 week ago
1
Overhang speed overrides Layer time Goal.

#4315 TwomD opened 2 weeks ago
2
Order-dependent crash when slicing two objects if one object is exactly 5mm tall

#4313 seancmonahan opened 2 weeks ago
2
Error while writing gcode: two points are at the same position

#4312 treeman closed 1 week ago
4
SuperSlicer MacOS ARM Release Builds Are Corrupt

#4311 jsaintrocc closed 4 days ago
4
Inconsistent infill printing sequence (grid)

#4310 CuredPrusa closed 2 weeks ago
1
Crash when Slicing

#4309 Tirpitz93 opened 2 weeks ago
3
Crash when trying to slice a model

#4308 Skorki51 opened 2 weeks ago
2
Unable to build with Boost 1.85 filesystem library

#4307 kc2zgu opened 2 weeks ago
0
Rectilinear support pattern not generated correctly

#4306 FredF2495 opened 2 weeks ago
0
Seam Notch Not Working from v2.59.9 and up

#4305 julianjc84 opened 2 weeks ago
0
Infill pattern doesn't rotate with the object

#4304 CuredPrusa opened 2 weeks ago
9
Heads up - unresponsive iron angle manipulation in 2.5 Nightly 240605

#4303 CuredPrusa closed 2 weeks ago
2
Error key:2000

#4302 StrDa121 opened 2 weeks ago
2
Crashing and closing when slicing

#4301 GalvanicGlaze opened 3 weeks ago
7
Floating Skirt (Sequential Printing, Supports)

#4300 Dobarekk opened 3 weeks ago
2
Crashes when searching for "Brim" in settings.

#4299 VE5BNC closed 1 week ago
0
SuperSlicer 2.5.59.10 Windows 11 Crash

#4298 robertspark opened 3 weeks ago
4
System Memory Error

#4297 apropdoc opened 3 weeks ago
2
M83 not being generated

#4296 james56b closed 2 weeks ago
3
(Feature) Rename some calibration names

#4295 poudenes closed 1 week ago
0
Infill, Advanced, Only retract when crossing perimeter - threshold too far outwards

#4294 CuredPrusa closed 1 week ago
2
Decouple Retraction & Wipe (for Wipe only when crossing perimeters)

#4293 CuredPrusa opened 3 weeks ago
9
Coordinate outside allowed range

#4291 AboloneAD opened 3 weeks ago
3
If model is simetrical, why is there a missing gap fill?

#4290 CuredPrusa closed 1 week ago
0
Start gcode

#4289 Tinchus2009 closed 1 week ago
1
Add option to relate infill angle to object orientation

#4288 TillScout opened 4 weeks ago
3
Sometimes the speed overview includes the travel move

#4287 CuredPrusa closed 1 week ago
13
Allow "Ironing post-process" for print setting with 0 top layers

#4286 Phil1988 closed 1 week ago
7
Bottom layers obstructed by height range modifier

#4285 CuredPrusa opened 4 weeks ago
1
Very low infill, will not update when changed

#4284 Rohrtech opened 1 month ago
2
New feature: gcode command in Height Range Modifier

#4283 CuredPrusa opened 1 month ago
9
SPEED IS STRANGE.

#4282 FoldZero closed 1 week ago
4
Auto fan speed not working properly

#4281 CuredPrusa closed 1 month ago
1
Support for extruded_volume_total macro in custom G-Code

#4280 TheOpponent opened 1 month ago
1
fill_aligned_z: fix uninitialized atomic_int64_t

#4279 Icenowy closed 4 weeks ago
0
"Wipe inside" doesn't show Depth on layer overview.

#4278 CuredPrusa closed 1 week ago
0
M107 called unnecessarily and far too often: Klipper halts (Timer too close)

#4277 madejackson opened 1 month ago
3