-
Few issues related to stm32f723 (maybe others f7)
- it has a single precision FPU while modm builds with `-mfpu=fpv5-d16` instead of `-mfpu=fpv5-sp-d16`
- the integrated USB HS phy seems not totall…
-
I have a problem when I run the pibooth, the message is
booth@raspberrypi:~ $ pibooth
pygame 2.1.2 (SDL 2.26.5, Python 3.11.2)
Hello from the pygame community. https://www.pygame.org/contribute.…
-
Does aaos raspeberry pi 4 support to use gpio
-
Relay 2 does not turn off 9v pin on flight controller.
Assigned CH8 to relay 2. Verified relay 2 is associated to GPIO pin 81. Tried different relay default options with no change. iFlight …
-
For my project we have a relay hat on the pi that is controlled by python code.
I use it with a pi4 and a pi5. If i install the INA260 library on the pi4 everything is fine.
if I install the IN…
-
Has anyone modified any BBC Micro emulator that runs on a Pi, so that a second processor emulation could talk to it by wiring a GPIO to GPIO cable (ie no level shifters between the two Pies - just wir…
-
**Describe the bug**
After initializing a GpioButton, the IsPressed property is always false, even if the logical state (depending on active low/high configuration) of the pin is true.
**Steps t…
-
Hello,
since a few days, I have a new CS-Z25ZKEW. This is a model with an empty plug and the wlan somewhere inside.
So, I thought, I can connect like this: [(https://github.com/DomiStyle/esphome-pan…
-
A python or C script to handle GPIO control, all installable/runable in the build. This is just the first step before we actually control the sensor.
DoD: A script the toggles a GPIO output, proof th…
-
Hi,
I was compiling the code on esp32-s3 OTG and I get these errors
how can they be fixed?
In file included from /home/mc/Arduino/libraries/ESP32-USB-Soft-Host/src/ESP32-USB-Soft-Host.h:5,
…