-
Hi, i have managed to dissasemble the x2 and reverse engineered the bms, the charger cartridge, and the smart cartridge pinout, I would love to help you and write this manual with you! I believe you …
-
My battery from Dyson V15 detect (SV22) stopped working suddenly, even it had 14 minutes left on LCD.
It didn't give any power and did not light any LED.
I opened it and measured the cells voltage…
-
It was working fine before vacation, I left the ac turned off during vacation, and now I am back and it’s not working anymore. I tried to delete the device and add it again, it sees it, but it’s doesn…
-
### Is your feature request related to a problem?
Improve the status information related to the BMS and BAT. Currently, both objects rely on the `embObjBattery` device which is not at all compliant w…
-
hi David, many thanks for this project I resurrected my old battery, but it's a little delay compared to the original battery. with original battry, it's almost same time the motor started when I push…
-
Hi, excuse me for muy english.
Can you use ble antbms communication?
The problem with serial port style is that only connect with bms from python and can not work with the aplication both together.…
-
hi, I think you connected via the display cable I would like to know if it was possible to connect to the serial interface of an ESP and / or what connections did you use to connect to the BMS?
-
Hi David, could you write a detailed instruction on how to compile a firmware file from the source file, for example, if I use high-capacity cells, I understand it also needs to be indicated in the co…
-
Hi,
I stumbled over your Work while searching fir a way to Connect my diy Batterie To a growatt sph 3600.
Do you have morgen Info about the can protocol To create an Adapter using esp32 To my used…
-
Hi Thinfever, many thanks for your project, I am learning BMS through your project, it really help me a lot.
I compared 188002 and 61442 temperature sampling circuit, they are different, one is NTC…