-
Hello, thank you for your Matter hub.
Would it be possible to add an illuminance sensor and state sensor to the list of supported devices?
I am using the presence sensor below, which includes a …
-
### The problem
I checked the logs, after installing HA core 2024.11.0 and found the message shown below.
### What version of Home Assistant Core has the issue?
core-2024.11.0
### What was the las…
-
Hi and thanks for an awesome integration!
I updated to the latest version 2024.10.0, (think I was using v1.0.11 before this) and have noticed a strange behaviour of the sensor.garo_wallbox_status e…
-
Hi,
I've been having a lot of issues with detection. I am having constant issues across 4 sensors where occupancy is both on when it shouldn't be, and off when it should be on. When occupancy is on…
-
This issue was actually caused by interference from OptiTrack motion capture sensors in the same space as the L515. Turning them off and the L515 data is fixed. This does not vary with C…
-
**Checklist:**
- [x ] I updated to the latest version available
- [x ] I cleared the cache of my browser
**Release with the issue:**
Compass-Card 2.0.0 / HomeAssistant 2024.8 and 2024.9
**L…
-
### Describe the bug
Incorrect behaviour yesterday (24/11/24) with the accumulative off peak usage tracker (kWh). It "jumped up" incorrectly to follow the total accumulative usage during the 7-9am…
-
Bonjour,
Merci pour cette intégration tout d'abord !
Pourriez vous me dire ce qu'il ne va pas lors de la config de mon sensor dans mon yaml :
```
# Consomation de gaz
- platform: gazpar
…
-
**Describe the bug**
Since updating to 0.3.2 my HMS-400W-1T hasn't reported any data anymore. It shows up as connected, but all other sensors and diagnostics have gone to unknown for both the DTU and…
-
**Context**
Usually external monitoring data is sent by an installer or sensor with a new DID. Technically, `ref` variable becomes the DID of the new device.
In metered energy policy, there is a…