-
Has anyone tried the firmware on a Slampher light fitting? Although mentioned in the readme.md, I can't find any reference in the code. The schematics seem pretty similar to the std. sonoff, apart f…
-
### Current Situation
I picked up a few of these boards and I am hoping I can get this project loaded up on them? Unfortunately I'm having a hard time picking the right board/platform (I think?)
h…
-
My sonoff mini has FW 3.3 as latest FW version so I cannot upgrade it to 3.5.
2 weeks ago it was possible with other sonoffs minis
-
### What happened?
If I try to set the Power-On enum behaviour via Zigbee2Mqtt, I get the following error:
Publish 'set' 'power_outage_memory' to 'Attic 1' failed: 'Error: Write 0xa4c138e0d51c2b85…
-
Note! This request is for ZDongle-E with Zigbee Coordinator firmware (and not related to request with "Zigbee Router firmware").
@Daniel-zhan-itead Can you enable "touchlink" (touchlinking) support…
-
Add support for Sonoff's DIY smart switches: https://sonoff.tech/product-category/wifi-diy-smart-switches
-
### Device
Sonoff S31
### Version
espurna-1.15.0-dev.gitb409dc27+github230330-itead-sonoff-s31.bin
### Question
I installed the ESPerna firmware on two different Sonoff S31 Outlet devices and and…
-
I would like to know if the DIY jumper could be used as a GPIO input?
I could flash in with Tasmota on a Mac using [https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-DIY#manual-flash](url) and in…
-
Just to document...
Seems 3.7.6 needs deviceid to be valid or api calls just sit there. You get it from the usual `curl http://device_ip:8081/zeroconf/info --data-raw '{"data":{}}'` (NOTE: don't set …
-
### What happened?
Failed to init port with error Error: Error Resource temporarily unavailable Cannot lock port
Zigbee2MQTT:error 2024-05-08 13:55:58: Error while starting zigbee-herdsman
Zigbee2M…