-
Hi again,
I'm still working with master and l4t-32.5.1. When I ran deploy.sh command to generate the tarball for Jetson Xavier NX as target, I got following error :
Generate Multi-Spec BUP Tool…
-
Hi,
I have attempted to install the Xavier NX drivers, but the cameras cannot be recognized (no "video0" in /dev directory). I've tried with both the C-158c and the C-319c cameras from the Alvium …
-
Hi Guys,
I am working on the integration of ROS [ moveit, rviz, etc] with Nvidia IsaaC SDK/ Jetson devices. I was advised to study your project as it uses nvidia hardware.
Could you let me know if y…
-
I'm installing the pytorch on Jetson target board(Nx, AGX, nano...).
Official Pytorch for jetson wheel is only for python3.6, so I use the installation through the source.
However, during the instal…
-
### Expected behaviour
Successful creation of a .whl file according to the [provided guide](https://github.com/opencv/opencv-python#manual-debug-builds). Wheel file should account for customization…
-
### 问题描述 Please describe your issue
Hello.
Inference tests were performed in Desktop and NVIDIA xavier NX.
But i can’t compare inference result, because i don't have Reference information.
HW Sp…
-
Found NO NVIDIA Driver in your system
- Jetson Xavier NX + Jetpack 4.5.1
Can you please update the docker ?
-
I have previously been using these drivers with Jetson nano dev kits, which are the ones produced by Nvidia themselves. Now we are looking at using the Xavier NX but Nvidia no longer produces these, i…
-
**Describe the bug**
When running the `E2E_Example `notebook with cuSignal 0.18.0 on a Jetson Xavier NX (8 GB of RAM), JupyterLab reports a
kernel restart running "Run Periodogram with Flattop Filte…
znmeb updated
3 years ago
-
**Describe the issue**
I configured the GPIO pins according to https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/hw_setup_jetson_io.html#wwpID0…