-
I'm using espflash master to flash a esp-idf-* (master) project with espflash to a esp32c6.
```
espflash flash --monitor
[2024-01-22T08:43:49Z INFO ] Serial port: '/dev/ttyACM0'
[2024-01-22T08:…
t-moe updated
3 months ago
-
`esp-hal` Matrix channel: [`probe-rs` and `usb-serial-jtag` will work together](https://matrix.to/#/#esp-rs:matrix.org/$pqQPbzoV6qfccsEEnetHKy-nR1wK5PoZze-q5Bocp3k)
Check out:
- do we need to give…
-
I've spent a rather confusing couple of hours trying to diagnose behaviour that I'm seeing in OpenTitan. There, we have a [frontdoor agent](https://github.com/lowRISC/opentitan/blob/master/hw/dv/sv/jt…
-
We can add support for Remote JTAG support, enabling debug of additional CPUs using OpenOCD tunneled over Wishbone.
-
### RT-Thread Version
master
### Hardware Type/Architectures
duo s
### Develop Toolchain
Microsoft VScode
### Describe the bug
1. 使用scons --menuconfig选择duo s。
2. 烧录后读写到sd card。
3. 串口转USB连…
-
http://www.embecosm.com/appnotes/ean5/embecosm-systemc-jtag-cycle-acc-ean5-issue-1.html
Nic30 updated
4 years ago
-
Hi,
I'm trying to upload PULPissimo hello example on zcu102 board. Why the need for an external JTAG-HS2 adapter since connector J83 and J2 of zcu102 board support JTAG?
Anyway I've only DLC9LP X…
-
Hello,
I am using PULPissimo and currently trying to load the S25FS256S flash via JTAG.
The goal is to be able to load an image, for example an image of the _hello_world_ test, into flash and exec…
-
I am trying out a ESP32-C3. The board is a Lolin C3 mini, v2.1.0. In this issue I will collect changes required to run Ahoy on an ESP32-c3. If ever successful (big if) this can be used for a pull requ…
-
I recently experienced that shortly after starting CircuitPython, JTAG debugging on the Kaluga would stop. I think this may be due to #3643, though I didn't bisect it. I can work around it by making…