-
So I followed the instructions about getting a new firmware on the Pico, eg: on a plain board jumper on the usb-power, adding the boot number pressing the restart button then copying the file removing…
-
Hello.
Can we have the steps to return machine to original state please?
-
In the readme.md it states:
> Enter the bootloader. This will occur automatically if no program is detected. If you built CanBoot with an alternative method of entry you may use that. If upgrading fr…
-
cp: cannot stat '/home/mks/openq1/mcu_configs/.config.mainboard': No such file…
-
I just flashed the Leviathan with klipper 11 and then told mainsail to update everything. Now I can't flash new firmware it says it can't find the usb port.
I press sw1 twice and the boot loader le…
-
Hi,
i am using SB2040 with UTOC-3 to communicate to my RPI.
i successfully flashed the SB2040 with Katapult on a 1,000,000 Canbus speed. however i am getting timeouts on homing so i decided to t…
-
Hi Team
Reading the documentation avaialble for the Katapult Terraform provider, noticed that currently it is not possible to import resources into Terraform, so that we can manage currently deploy…
-
I have completed a review of the eXoDOS games using X, Custom builds, or Daum. With a collaborative effort with the Staging team on testing and code fixes we have managed to move all but a few over to…
-
I tried another update today, as `klipper` required that the MB be flashed, and I just realized that this has never worked. I can install `katapult` and `klipper` via DFU mode with the following:
…
-
Hello, I have two STM32G0B1 devices, one is the BTT ercf board (MMB) and the other is an EBB42 toolboard.
I can scan for both devices with the flash_can.py tool.
```
Resetting all bootloader no…