issues
search
MotorDynamicsLab
/
Leviathan
Leviathan Main Controller for Voron 2 / Trident 3D Printers
50
stars
14
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Support for encoded Close-Loop Steppers?
#21
jhox616
opened
1 month ago
0
Provision the Leviathan over SWD?
#20
Poofjunior
opened
3 months ago
0
Dev/dark mode
#19
Poofjunior
closed
3 months ago
1
Pi Hat Adapter
#18
Labrat3D
opened
3 months ago
0
Add Stealthburner/Clockwork 2 gear ratios to klipper configs and set …
#17
thunderkeys
closed
3 months ago
1
Switching to DFU mode is no longer possible
#16
MarkusNiewoehner
opened
6 months ago
7
Amp limit of rpi connector
#15
HaernCalistinson
opened
8 months ago
1
pwm fan
#14
sergelhr
opened
8 months ago
1
safe_z_home for Trident is negative (maybe on purpose)
#13
ccatlett1984
opened
9 months ago
0
Limited capacity LED driver for strip lighting?
#12
jetcat-bob
opened
9 months ago
16
PI4B don't boot with power suplly from leviathan board and usb connected
#11
sergelhr
closed
8 months ago
12
Will not boot to DFU mode.
#10
Killajoedotcom
closed
9 months ago
0
usage of tach wire with 5v delta fans results in fan shutting off
#9
TheRealDeathsneeze
opened
9 months ago
7
other users
#8
Magneticrob1
opened
10 months ago
4
Can the Leviathan be configured for sensorless homing?
#7
jetcat-bob
closed
9 months ago
3
P1 connector what for?
#6
sergelhr
closed
10 months ago
2
Unable to update firmware after updating klipper - mainsail
#5
midicdj1000
closed
10 months ago
19
no 12v supply for fan headers
#4
TheRealDeathsneeze
opened
11 months ago
15
Manual Diagram Out of Date (Page 13)
#3
ChrisWhite1985
closed
11 months ago
4
Marlin source
#2
thisiskeithb
closed
1 year ago
2
Added Leviathan DIN mount.
#1
stvptrsn
closed
2 years ago
0