-
Is there a way to make the laser slightly overlap the cut end and begin points?
Should only have to be the width of the laser beam.
So as an example:
Current: Cutting a 2" circle, the laser would tr…
-
Currently, if I have a part with say multiple layers or colors. When I am in the "Mapping" tab, I can set two operations to "Engrave". But then in my "Laser settings" tab, if I want one of the Engravi…
-
On my Wainlux K6 Laser i get this Error:
IOException: Port in use: COM3
A lot of people also get this error....
Any help or workaround??
greets
-
As mentioned in #1696 we've had complaints about the fumes from Sheila. We're thinking of getting a laser fume filter that would alleviate these problems. It's worth considering that it might be usefu…
-
hi guys and thanks for awesome firmware, I'm windows arduino user and I couldn't yet upload your firmware with your instruction , if you have better links or know any guys who did that , kindly let m…
-
It is not immediately clear from the mapping dialog that the order in the mapping also represents the order in which the profiles are executed.
This:
![screen5](https://f.cloud.github.com/assets/15208…
mgmax updated
6 months ago
-
after my PR #143 gets merged the outdated.md shows alot of files are not up to date.
-
Hello.
I'm Arthur of the Smoothie project ( smoothieware.org ) and I also sell Open-Source-controller laser cutters ( robotseed.com ).
We've had some users report positive experience with this sof…
-
Please add Support for Ramps 1.4.
-
Good day or whatever time in Your location now :-)
Need some help for refilling printer head with printing solution. For now I simply cut off half of top cover, throw out sponge and fill cartridge…
Rykot updated
11 years ago