-
I have some broken LED panels that Iwant tofix. To identify dead pixels, I want to use an esp32 to drive a white screen on the panel. No matter what i try, what libraries, I can't get it to work. No…
-
When the arcade feature is enabled. The arcade should communicate with the microcontroller to set patterns for the led strips.
- Main menu, instructions: lights show transition between green and p…
-
Firstly thank you for your design it is fantastic!
I am however having a problem in getting the WS2812 ledstrip to light, I have wired it up to the 5v, gnd and pins a2 and a3 separate data but daisy…
-
There could be a function like this:
bool pattern(int num, SpeedSetting speed, bool repeat = false)
Then the blink code would play only once, and some action by another function could be taken …
-
Total beginner, trying to build this scoreboard ( https://github.com/riffnshred/nhl-led-scoreboard) and can't seem to get the connection to the matrix right, keep getting address issues. Its an Adafru…
skggs updated
4 years ago
-
Hi first of all : A great JOB!
I have minor suggestions...
When using the nanolaef mode (I used 10 Leafs with each 29 LEDs) I found the following errors in pattern
In "Pride" and "color Waves" 9…
-
Hello,
I've printed and assembled all the parte. It is working with the FASTLED demos. Now I want to install this but I'm getting the following error:
```
esp8266-fastled-desk-light:464:5: erro…
-
I have the dash button press triggering a python script that blinks lights my Pimoroni Led strip. If i restart node-red it all behaves as expected (1 button press = 1 run of the script blinking light…
-
https://www.revrobotics.com/content/docs/REV-11-1105-UM.pdf
Demonstrate LED Light control on Kitbot. Could be used for Driver Feedback/Updates on Robot. Different Light Colors and/or Patterns for dif…
-
Idea @LukPopp0
B1 is brightness. It is independent.
B2 sets the colors.
B3 switches between single color and multicolor.
B2 has 6 slots each.
Red, green, blue, yellow, cyan, magenta. If B3…