-
So I built one of my boards with the D1 mini.
I hooked the red, white and black wires to the GDO.
LiftMaster Security + 2.0
I can read the state in HA, motor running, obstruction clear or not a…
-
I have a chamberlain ML700EV with 8 terminals and a ratgdo 2.5i with latest esp software.
My setup features no wall buttons and i previously only used the radio remotes. Type TX2REV with only one butt…
-
Noticed that our car’s programmable HomeLink GDO buttons now take multiple tries… I dismissed as RF interference for a while. Today I realized my clickers also take multiple tries to successfully sen…
V025 updated
10 months ago
-
About half a dozen times now RatGDO will randomly open the garage door. Checking the logs in HomeAssistant, it doesn’t appear to triggered by HA (just says “garage door opened”.)
im using 2.54 mqtt…
-
GDO = LiftMaster 8355 (Sec+ 2.0)
Wall Control Panel = 882LM
ratgdo HW 2.5 + 2.51 MQTT firmware
Issue:
GDO operates the door and wireless remote lock/unlock when the ratgdo is rebooted.
Steps …
-
I just spent an hour trying to get this to work and had no success. Turns out it's not supported in ESPHome firmware.
https://paulwieland.github.io/ratgdo/01_features.html
Just letting others k…
-
Good evening Paul,
I flashed my new ratgdo with your MQTT firmware, but I was never able to get the homebridge plugin to actually work with it, despite everything being set properly.
The plugin …
-
Having an issue with rolling code remotes (Homelink & Liftmaster) only sporadically working on 8216e9 with a 2.5 board. Before I began I wiped the memory because I couldn’t find some of my remotes and…
-
**URL**: https://www.liftmaster.com/garage-door-openers/c/all-garage-door-openers#tab=products
**Browser / Version**: Firefox Mobile 117.1
**Operating System**: Android 13
**Tested Another Brow…
-
I recently installed a RATGDO device on a Liftmaster garage door opener. Installation was straight forward and easily achieved. Once installed, I modified one of my NodeRed flows to utilize the “binar…