-
Are you planing to support LVGL 9?
-
I am trying to connect a keyboard to the LilyGO T-Display-S3 AMOLED as an input device using USB Host mode. However, I am encountering the following issues:
The USB DM and USB DP pins, which are me…
-
I have already burned the firmware but I don't see the program running. The screen is black. My device is LILYGO TDisplay S3
-
I have a LilyGO SIMCom 7600G-H module, which I tested with a Verizon or T-Mobile SpeedTalk SIM. I found that the voice call command was not working, with "NO CARRIER" as the reply from the modem. Howe…
-
### The problem
I have four of the Lilygo/TTGO T-camera ESP32 boards with OLED and mic purchased from [AliExpress](https://www.aliexpress.us/item/2251832782369013.html), albeit not using the I2S mi…
-
It says in the docs that **you can wake up the unit by touching display**. I have tried the TOUCH examples but I don't understand how you can "wake up" the unit when poweroffall is used.
**### QUES…
-
I'm looking for a simple integrated ESP32 solution and I found this Lilygo T-Panel S3: https://www.lilygo.cc/en-ca/products/t-panel-s3?variant=44273605509301
It's available in CANFD. Would this wor…
-
`ED052TC4` is a neat and affordable (10-20$) 5.2" high resolution screen with 720×1280 (WXGA) with 283 PPI similar to the one used in the LilyGo T5 but with higher resolution.
It uses a 50pin `WP27…
-
The T-Deck is an ESP32-S3 board in a semi-blackberry form factor with a BB keyboard, an (ST7789-compatible) display, power managment, optional LORA, i2s, microphone and some more, but no uart-to-usb a…
-
**Describe the problem you have/What new integration you would like**
The Lyligo T5-4.7inch is a great e-paper module based on an ESP32. It has a resolution of 960*540, 16 gray level and support …