-
```
What change would like to see?
It could be nice to add an example of using the internal pullup resistors (in
addition and contrast to an external resistor). This is especially relevant
for the…
-
```
A lot of the board-level targets (lilypad, PRO series) seem to have been
defined in the early days of those boards' development, when they were still
using ATmega168 CPUs. Most of the current v…
-
```
A lot of the board-level targets (lilypad, PRO series) seem to have been
defined in the early days of those boards' development, when they were still
using ATmega168 CPUs. Most of the current v…
-
A Discord bot to monitor the PoW signal sent from the Lilypad cron server. The bot will monitor the Arbiscan address 0xd10d15cc705f7d2558352b1212a9b3685155d93d looking for method 0xb681f2fd. If this m…
-
LilyPad recently got updated to auto detect if analog signal is not supported to switch to digital.
Would be nice to include it on Pokopom.
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …
-
```
What change would like to see?
It could be nice to add an example of using the internal pullup resistors (in
addition and contrast to an external resistor). This is especially relevant
for the…
-
```
What change would like to see?
It could be nice to add an example of using the internal pullup resistors (in
addition and contrast to an external resistor). This is especially relevant
for the…
-
currently we're pushing different architectures to different tags, we should instead use `docker manifest` to combine them proper like
https://stackoverflow.com/questions/66337210/is-it-possible-t…
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …