-
when compiling simple examples from this repro like blinker.ino, I always get this error message:
```
C:\Users\WG.W2K\Documents\Arduino\libraries\TreeLight-baseTopic\src\TreeLight.cpp: In member fu…
-
Build options changed, rebuilding all
In file included from C:\Users\admin\Documents\Arduino\libraries\firebase-arduino-0.3\src/Firebase.h:30:0,
from C:\Users\admin\Documents\Ar…
-
See [enesbcs/ESPEasyPluginPlayground Plugin 166: WiFi Power Management Functions](https://github.com/enesbcs/ESPEasyPluginPlayground/blob/master/_P166_WiFiMan.ino)
TD-er updated
6 years ago
-
### The problem
Setup: ESP32 NodeMCU, with ESPHome 2022.2.4 installed. GPIO 33 connected to Wemos D1 relay shield. Active High, attached to NO. This is to open a door on HA command.
The same setup…
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ ] Master
- [X] Development
**Esp8266/Esp32:**
- [X] ESP8266
- [ ] ESP32
**Hardware: ESP-12e, esp01, esp25**
- [ ] ESP…
W4KRL updated
5 years ago
-
Hello,
I am using the Wemos D1 Mini. I am able to connect via AP mode from device to the Wemos. I was able to connect to Station Mode to home WIFI. It stays for some time and when reset, it reverte…
-
### Board
ESP32 Dev Module /Wemos D1 mini ESP32
### Device Description
ESP32 dev board (WROOM 32D)
also tested with Wemos/Lolin D1 mini ESP32 Version
### Hardware Configuration
nothing attached…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
After flashing with:
> esptool.py --port /dev/ttyUSB0 --baud 1000000 write_flash --flash_size=4MB --flash_mode dio 0 --verify
```
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type...…
-
**Describe the bug**
I'm trying to setup a SH1106 1.3" display using this library. Unfortunately whenever I try to compile it in the IDE, even with the minimal example given in the README.md, I get t…