-
Hi, is SquareLine Studio supported with this board, 5"
Any examples?
-
hi,
we tried lv_portesp32 on esp32 wrover-kit board , the version we had is not v4.1 but a older version of the kit.
The lcd image is mirrored ( attached are config screenshots),
tried all orie…
-
Hi there,
I'm trying to understand this very helpful UserDemo to get prepared for my own project with a CoreS3.
Taking a deeper look at function ```m5gfx_lvgl_init```, I wondered if there is a s…
-
Hello!
I must say you inspired me a little. Was thinking of making project like this for very long time but never had time to figure which eInk screens would work best and get drivers working.
I s…
-
## Environment
- Development Kit: [ESP32-Wrover-Kit]
- Kit version (for WroverKit): [v1|v2|v3|v4] (not sure, using a custom burner board)
- Module or chip used: [ESP32-WROVER]
- IDF versio…
-
A version with the PSRAM would be amazing for ESPhome + Home Assistant uses :) ESPhome LVGL component uses allot of ram so cannot easily run without PSRAM. If you can also use the S3 module it has bui…
-
### Board
ESP32S3 Dev Module
### Device Description
ESP32S3 Dev Module
### Hardware Configuration
not anything
### Version
v2.0.14
### IDE Name
Arduino(Multiple versions, including the latest…
-
Hello! Do you plan to use LVGL?
-
Dear Rudolph,
I was able to make Arduino PlatformIO example to work on my test bed composed of ESP32 MCU and a Riverdi EVE3 7" display.
I would like to use LVGL (either v7 or v8) with your library.…
-
I’ve done a similar project.
You might find some code useful and re-usable in yours. :)
UI is LVGL.
and various protocol parsers.
pypilot tcp, Victron MQTT, SignalK tcp,
NMEA 0183. MDNS discov…