-
Hi,
I've made it on a nodeMCU board,
It works good but having 22kohm res i have to power it with 3.3v.
If I do with 5v as documented temp goes out of reasonable range.
Makes sense or I'm doing s…
-
Connecting an ADXL345 to SPI1 on my Manta M8P causes the MCU to not boot. It seems like the bootloader is conflicting with some other device on SPI1 on boot.
Can anyone confirm if there is any othe…
-
### Configuration
**Operating system**: Windows 11
**PlatformIO Version** (`platformio --version`): Core 6.1.16 - Home 3.4.4
### Description of problem
When I open my 3D print Marlin proj…
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The first call M109 turns off my extruder cooling fan.
Changing temperature through M104, or…
-
### Describe the problem/bug
After a fresh install of Mycodo on varying Pi models and OS versions, the MAX31855 UART input continues to produce a runtime error upon activation, which leads to the M…
-
I made a post in the main branch of [Marlin](https://github.com/MarlinFirmware/Marlin/issues/22996) & another user [here](https://github.com/bigtreetech/SKR-2/issues/96) has a similar issue.
What I…
-
Hi
I installed a BL Touch (from Antclabs) and the Micro Swiss Direct Drive Extruder Setup. Now i need to change the #define X_MIN_POS and #define Y_MIN_POS to #define X_MIN_POS -5 and #define Y_MIN_P…
-
-
let's study.