-
## Issue Description ##
Hi!
I am doing the Handover tests I have installed all the software necessary for the test, I was able to do the test with a virtual SIM card and when I change the values…
-
MT7615E AC has been started in K2P, but 2.4G cannot be used
qiuzi updated
2 years ago
-
New plugin for LimeSDR support as a MIMO device. Half synchronous for Rx and Tx.
This is mainly for LimeUSB since it has 2x2 MIMO support. Other flavors will expose a single Rx and Tx port and not …
f4exb updated
3 years ago
-
I have a LimeSDR-USB, which is mimo 2x2, so I should be able to listen to two separate frequency ranges simultaneously.
I set R0 up for some 2m decodes on Lime RX1
I then add R1, using …
-
It is currently impossible to make a robot spin in place or turn to an angle with a RamseteCommand. This is because the starting and ending point of the desired trajectory have the same x and y coordi…
-
https://github.com/lzybkr/PSReadLine/issues/new
######################################################################################################
Last 200 Keys:
Space Space Ctrl+l 0 Ctrl+z…
-
Hi,
I'm trying to use this tool to make new 00028874 file,
but it seems zlib-flate does not support compression level set,
I only can use `zlib-flate -compress < $1 > 00028874` instead of `zlib-f…
-
Hi,
When i add channels to MIMO device they don't seem to be connected, they are not shown on the waterfall and there is no signal on the channels, am i doing something wrong?
![image](https://…
-
## Issue Description ##
Built here and also tried apt-get
when I run srsenb ( :~$ sudo srsenb ) I get the following output:
`pat@worker:~$ sudo srsenb
--- Software Radio Systems LTE eNode…
-
Today I received the following email:
> Добрый день , мы тут всем форумом 4pda бьемся , что бы создать файл агрегаций на note10 snapdragon . Файл агрегаций для s10 snapdragon у нас есть и он уж…