-
dtoverlays for shutdown and poweroff seem to have no effect.
I added the following lines to /boot/config.txt:
`dtoverlay=gpio-shutdown,gpio_pin=6,active_low=1`
`dtoverlay-gpio-poweroff,gpiopin=5,ac…
-
Hi, Thanks for taking the time to make this.
I have managed to get this to mount in Raspberry Pi and i can view the contents of the drive within terminal, but i can't see anything in file explorer …
-
- could not mount cifs (install cifs-utils?)
andig updated
8 years ago
-
andig updated
9 years ago
-
I have the Rpi zero w and when I try to run the spotify connect.sh it gives this output:
pi@moode:~/spotify $ ./spotify-connect.sh
Loading Spotify library...
Last.fm: incomplete credentials, not …
-
ashuffle reports connecting to MPD version 0.22.0
Does ashuffle have a version number? Can't report that.
Raspberry Pi 2B with MPD library on NAS via SMB and accessing through wifi.
Start as…
-
Hello to all,
I normally use welle.cli as a server streamer on Raspberry pi.
I decode the streaming on a PC using VLC and, thanks to the issue #559 ([welle-cli] Allow switching channel on get reques…
-
I've tried all the suggestions on here to try to get the pijuice HAT to communicate with the pi through the GPIO connector. It will rarely show up on 14 and 68, I was able to get it to connect long en…
-
**Describe the bug**
When I connect the HiFiBerryOS from PC browser, I can see Korean characters but it is not correctly displayed in Raspberry Pi HDMI screen (Maybe font is missing?)
**HiFiBerryO…
-
Hi Alan, great work on this. But I've got a couple problems. I'm working with the same Sony tuner you used and I've wired the switch board matrix to the same GPIO pins as you did (just not necessari…