-
I hadn't n been able to find if there is a way to join the two together? I need to use the WiFi as a really long cable.
-
Hi,
how I can to read with arduino interface, data from serial input (RX) and put it on display ?
for example, a device send to Nextion numbers from 1 to 9 like 123456789, and I need to see it …
-
I tried many of the examples with both an Arduino UNO and a NodeMCU v0.9 (ESP8266) and all of them worked in case of the UNO and none of them in case of the NodeMCU.
I connected the Nextion's RX to N…
-
Hello, I have the following Corexy setup:
Board: Raads
Display: Nextion
Number of extruders: 1
Heated bed
Firmware 4.3.8 commit 32646c2d282f26f78501d9d0dafba414b1e63688
Repetier Host V2.1.3 w…
-
I'm not sure if this is something specific to PiStar, but...
I've written my own parser for the Nextion data output, and I've noticed that sometimes MMDVMHost just sends the callsign e.g.
t2…
-
### Enhancement Summary
Adding support ot use custom icons
### Detailed Description
Is-it possible to add the possiblity to use custom icons (ex.: fapro:mycustomicon). mainly in main page where the…
-
I have a square block in the mmdvm logo at the top left of the 5 inch screen
-
### Issue description
SD Card is detected and files listed, but not possible to choose and start programm *.gcode
If tap very fast sometimes programms starts or show question about start file.
##…
-
Hi Gilles,
the file "ESP32_V2.tft" in "SD Card.zip" is probably invalid.
Please doublecheck the file.
I also tried to open it with Nextion Editor Simulator.
Greetings to France
Andreas
-
I have followed the example but button callbacks dont seem to work; Any idea? does anything special need to be done on the nextion editor to the HMI file to get callbacks working? This is both on ardu…