-
It is necessary to develop a printed circuit board (PCB) for the chassis controller.
The general functional system diagram: [Link](https://kpi-rover.github.io/docs/system/architecture)
The PCB r…
-
Automation, industrial control and robotics projects need to drive motors and actuators. FPGA outputs typically don't have enough current and voltage capability to drive them directly.
While there…
-
- [x] Regulator for Notecard + rest of devices (@zerblatt007 )
- [x] [u.fl connectors for antennas](https://no.mouser.com/ProductDetail/TE-Connectivity-Linx-Technologies/CONMHF1-SMD-G-T?qs=7D1LtPJG0i…
-
Design a dual VHF/UHF PCB, for use with BOTH a DRA818V and a DRA818U. The board will be larger, so needs a new 3D printed cases for this one too. I imagine this needs a diplexer on the PCB to ensure t…
-
### Prerequisites
- [X] I have read [FAQ](https://yaqwsx.github.io/KiKit/latest/faq/)
- [X] I have searched existing issues (including closed ones)
- [X] I use KiKit at least version 1.6.0 (older ver…
-
Hi,
It's possible to share hardware pcb and schematics, bom list.
So we can learn from and also improve it?
-
Ovaj issue se odnosi na početnu fazu projektovanja PCB-a za naš sistem, sa fokusom na integraciju mikrokontrolera PIC24FJ64GA702. Električna šema će biti dizajnirana u KiCad softveru, a cilj je projek…
-
Since I cannot find a way to ask questions about the PCB files, Ill just post it here even though it is not an issue. Is it worth to have the PCB professionally manufactured at this point? I don't hav…
-
Hi taHC81
Not an issue, just a suggestion :)
What do you think about the use a direct connection between and ESP32-S3 models to eltek serial port, and removing CAN-TTL IC ??
Once ESP32 is exte…
-
very good project,would'u provide hardware design file? such as pcb file and another
thanks
@ZABF