-
Regarding hardware versions:
> a major number for major layout and schematic changes such as changes to board dimensions, components placement or general functionality and
> a minor number for min…
-
Hello,
Would it be possible to get the raw PCB design files?
In eagle format or similar.
I would like to modify the PCB a bit to work with a different FPGA and layout.
Greetings,
Alexander
-
How can we improve routing functions?
- [ ] support global router
- [ ] support auto-routing with arbitrary directions, at the moment groups of routes need to have the same angle.
See `gdsfac…
-
This is pretty low priority and I think can be worked around, but it's a potentially nice quality-of-life feature.
KiCad footprints in .kicad_pcb files have additional properties that may be useful…
-
Thanks for this converter! Really useful stuff.
We have a bunch of medium complexity Altium projects (all open hardware) over at [Sinara](https://github.com/m-labs/sinara) and I converted a few of …
-
Hello! Thank you for all of your awesome contributions.
I am in the process of making some redesigns of the MhzDisplayBlaster to fit a particular baby AT case that I have. It is my first time work…
-
I drew up a schematic and laid out a PCB for Rev-1 of the hardware, the audio interface is needed to amp/buffer the audio LTC signal into digital signals to/from the Pico.
![rev1-render](https://gith…
-
I just built your PCB and it is working like a charme. Thanks alot for your work. As I tend to recycle material I desoldered the 4 pin header and the slide switch from the original power supply PCB. T…
-
Hello, I see files for printing the front panel here in the `hardware` folder, which is great! I was wondering how I could fabricate a PCB - do you have Eagle/open source PCB layouts that can be uploa…
-
Since the main heat-sink is to be reduced in length (100mm --> 75mm) the mounting holes on the currentsink pcb serve no purpose.
The new design is to use individual (two) heat-sinks for the complim…