-
Hey mate, nice project you've done here, but I plan to use PMOD_CLP on zynq zybo board, does all I need to do is to change the memory location of JA and JB?? or are they exactly the same? I don't know…
-
This will require writing to the onboard SPI flash.
-
I wanted to do some DSP stuff with the Digilent Pmod I2S2 plugged into the Trenz tec0117 board, but ran into issues where the PLL ran at a stuttery 2MHz instead of 25MHz.
In my pursuit of playing w…
-
According `top-icebreaker.pcf` pinout in README.md should be:
* `P1B3`: USB DP
* `P1B4`: USB DN
* `P1B1`: Pull up. Resistor of 1.5 kOhm to USB DP
I tested it on my icebreaker board and it…
-
Hi,
I want to connect the octo soundcard directly to an fpga board like a spartan7 via gpio/pmod (or other is there a better way?). I can obviously do this through an rpi connected to the fpga but …
-
Hi All,
I want to reuse some of these nice clear simple examples to show off the pmods on luna (bsd 3-clause licensed as per https://github.com/greatscottgadgets/luna/blob/main/LICENSE_software.txt).…
-
Hi. This is great. I've tested this demo with the [Müsli PMOD](https://github.com/machdyne/musli) and it works as expected.
I wonder if it would useful to support Wishbone and/or SPI slave mode so …
-
proposed solution:
```
export OPENFPGALOADER_SOJ_DIR="$release_topdir_abs/share/openFPGALoader"
```
-
Hi I came across this repo and your youtube video, and its wonderful that you are sharing how you did this.
Is it possible to get some guidance from you on how to implement the FFT for my circumsta…
-
Initially raised in https://github.com/apfelaudio/eurorack-pmod/discussions/37
There's nothing limiting us to W=16-bit samples (maximum from AK4619 is 32 bits per sample).
We should try some dif…