-
... to prevent damage when someone assembles both
-
Power over ethernet should be supported on all ports, even on input for up to 24V out with possible modification for higher voltage devices.
PoE output per port should support:
- per channel switchin…
-
PoE input should primarily support passive 24V DC with gigabit support, much like Ubiquiti equipment with POE-24-24W-G injector. Due to recent advances in equipment and power requirements 48-50V inpu…
-
Is there any plan to have a version supporting wired Ethernet connetion?
ESP32 can accomodate with various Ethernet PHY chips, also combined with an 802.3af PoE supply this project could really ki…
-
Hi
When I am running this on RouterOS 7.11.2:
```python
connection = routeros_api.RouterOsApiPool(IP, username=USER, password=PWD, plaintext_login=True)
api = connection.get_api()
api.get_re…
-
Hello there! Looking to access work from home tools and ideas? Well, you're in luck! Debeatzgh has got you covered [[1]](https://poe.com/citation?message_id=198916008287&citation=1) [[2]](https://poe.…
-
There are various currently public submodules in scipy that are to be deprecated in scipy v2.0.0 such as `io.matlab.mio`. These files simply have two functions that are really overrides of the standa…
-
A galvanic TTL to RS485 device (Waveshare) is connected to T-POE-PRO (NOT opto-isolated) with a shielded cable.("2 wires + Ground + shield").
Where to connect signal RS485 ground and shield ground (M…
-
### The problem
When adding the Bluetooth proxy configuration to my ESPHome configuration, the device encounters a Guru Meditation Error and reboots repeatedly. This error occurs specifically when Bl…
-
Just purchased a brand new "PoE-Cam with Wi-Fi" unit (PN: U121-B)
Plugged it into my PoE/PoE+ 802.3 AF auto-negotiating switch, unit gets typical Ethernet lighting, but never broadcasts for DHCP. U…