-
With the latest broken collet (#1909) on the Kress Spindle motor and the known issue of play in the spindle motor bearing, I would suggest that it is time we investigated replacing the spindle motor w…
-
- [X] I have searched open and closed issues for duplicates
- [X] I am submitting a bug report for existing functionality that does not work as intended
- [X] This isn't a feature request or a discu…
-
Is there a guide on how to apply this to home assistant?
I followed your guide and connected my ESP8266 to my meter, setup mqtt on my home assistant and I was hoping there would be a guide somewher…
-
The schematic should contain a power delivery chip (we decided for CH224K hardwired to 5V) and a 2S battery charger, ideally with built-in step up converter. The USB 3.0 connector should be provided i…
-
Team Name : FENESTA
RuleBook Reference : nil
Question :
1. Do we have any specific Discharge rate/Waveform ,while discharging to the Energy collector from the Robot
2. Do we have specified c…
-
### Description
Skr mini e3 v2 died after one print running octoklipper over UART. Octoklipper was running on a raspberry pi 0 w2 and was communicating and powered by the tft pins
### Steps …
-
Add a powerup system with these powerups:
- [ ] Gunner - Add a friendly marine to your vehicle with a random weapon
- [x] Kong - Place a fusion coil behind you with a proximity sensor
- [x] Kill …
-
I ordered board with drivers from btt shop configured fw and uploaded it to board configured jumpers inserted drivers and started it. Board ran for 15 sec and shut down i saw leds turn off ater i remo…
-
Alternative sources for cable infrastructure building cost values for potential future reference
1. India 2022
- https://www.mgvcl.com/Upload/Cost%20Data/Cost%20Data%202022-23/labour%2022-23%20…
-
https://github.com/intel/media-delivery/blob/master/doc/benchmarks/intel-data-center-gpu-flex-series/intel-data-center-gpu-flex-series.rst#fixed-function-encode-vdenc
see https://github.com/intel/m…