-
Please include the following information when submitting a bug report:
* The Pycom board you are using: LoPy4 + Exp. board 3.1
* The firmware version you are "attempting" to use : LoPy4-1.20.2.r…
-
Hi Pycom
I'm one of the Kicad library maintainers, and would like to ask if you have considered adding your library data to the official libraries?
in order to do this, they will need to be lice…
-
Currently only GLL messages (only containing location information) are parsed. It would be useful if parsing of GPRMC messages could be done also including speed and direction information
-
Hello,
I use a lopy module with current version : (sysname='LoPy', nodename='LoPy', release='1.15.0.b1', version='v1.8.6-849-baa8c33 on 2018-01-29', machine='LoPy with ESP32', lorawan='1.0.0')
I'm t…
crc16 updated
4 years ago
-
error message "There was an error with your serial port module, Pymakr will likely not work properly...." shows up when starting visual studio code. Tried to reinstall but doesn't work.
VSCode:
V…
-
What I have done:
1. I am using FiPy with expansion board 3.1 to read external lipo battery voltage without any issue at pin P16.
2. Then I am trying to use the same FiPY on Pytrack 2X also with th…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using **FIPY (2 NOS)**.
Firmware: 1.20.2.r4
Pybytes: 1.6.1
* Exact steps to cause this issu…
-
When performing a softboot (Ctrl-D in REPL) there won't be any join. No data is received on the gateway either so it seems the LoRa chip is in an undefined state. Check the community if this is a know…
-
**Describe your question or issue**
Hi,
I would like to know if the Pycom LoPy4 is easy supported with this library, or that we should develop some custom Hal Configuration for this board first.
…
-
I encountered some instability of L01 while powered by my custom board. Errors are thrown when WiFi client connects to the WiFi AP of L01. Then I found out that it only happens with release 1.7.6.b1 a…