-
Look at this resource - https://github.com/mkfrey/u8g2-hal-esp-idf
Check if the SCL and SDA pins for I2C work proper.
-
https://www.dropbox.com/scl/fi/bw3jm983g58bayh48buz1/2024-06-04-10.10.18.jpg?rlkey=pyh4infu4e2jo7g7a26gwbqwx&dl=0
-
https://www.dropbox.com/scl/fi/mpq361megifl3v05tgdtx/2024-06-04-10.05.08.jpg?rlkey=mffhbb02e82h2xnoan8qd3aor&dl=0
-
### Steps to Reproduce:
1. Go to the swap page.
2. Select any token.
3. Enter a value with many decimals (e.g., 0.000006 USDC).
### Actual Result:
An error is displayed when entering a value wi…
-
I was trying to follow [this tutorial](https://learn.microsoft.com/en-us/dotnet/standard/commandline/) to see if I was able to create a CLI tool with tab completion, but I had a few issues along the w…
-
Originally reported by: **lzap (Bitbucket: [lzap](https://bitbucket.org/lzap), GitHub: [lzap](https://github.com/lzap))**
----------------------------------------
http://sprunge.us/NVPf
These lines…
-
Hello,
i'm currently struggling to get my sht30 sensor up and running. I bought [this sensor](https://www.adafruit.com/product/4099) and i'm following [this guide](https://learn.adafruit.com/adafru…
-
## A link which I created just one week ago
https://www.dropbox.com/s/f7oy7f3ydh0kpyo/WordPress-Greenshift-v6-4-3-Breakpoint-Desktop-is-normal.png?raw=1
- ✅ Works fine to embed that image in a forum…
-
Hi @davesmeghead, as i say on home assistant forum, sometimes it's impossible to arm or disarm alarm.
Obligation to reboot HA and after it's ok.
I try 2, 3 times to arm …nothing append. After that i…
g4seb updated
13 hours ago
-
Originally reported by: **lzap (Bitbucket: [lzap](https://bitbucket.org/lzap), GitHub: [lzap](https://github.com/lzap))**
----------------------------------------
http://sprunge.us/NVPf
These lines…