-
### What happened?
Sometimes the inverter is stopped for unknown reasons, even though there is enough energy available.
Today:
 mbmd does not provide the currents of the phases
Can you provide them from within mbmd?
-
### Is your feature request related to a problem? Please describe.
Wäre es möglich anhand eines Datenpunktes per MQTT den aktuellen Verbrauch an Open DTU zu geben und anhand dessen das Leistungslimit…
-
Bert Melis esp32ModbusRTU (esp32ModbusRTU-master) + RTU04example
ESP32 DEVKIT (=MH-ET LIVE ESP32 Development Board)
REDEPIN stays in LOW state. I have a TTL/RS485 board with R/D pin.
The esp32Modbu…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.3 on 2024-04-04; Waveshare ESP32-S3-Zero with ESP32S3
Board ID:waveshare_esp32_s3_zero
UID:437BAD95F6CC
```
Libraries updated to …
-
### The problem
Naming has changes for several entities of homewizard integration https://github.com/home-assistant/core/pull/108854
I missed the breaking changes message for this.
After manually …
-
Hi,
Is the method "read_all()" implicitly assuming that all dicts are ordered in Python >=3.7? Is that the reason why your module is made for this minimum version of Python?
I'm trying to use yo…
-
### Is your feature request related to a problem? Please describe.
Die synchrone Abfrage der Powermeter Werte über HTTP+JSON (Z.B. Shelly 3EM) überschreitet mehrmals am Tag die konfigurierten zeitlic…
-
This was seen in UEFI (Tiano Core) build for RPi3 with the latest VPU firmware. Symptoms: garbled UART output and DWC2 USB2 stopped working. Now, for USB the UEFI fw was querying mbox interface for th…
-
Smart-evse V2 with 2.3 firmware
When set to smart mode, with both a SDM-630 for the EV and Mains, the charger starts and after a couple of seconds it closes the contactor again, starts again over a…