SmartEVSE smartevse issues

SmartEVSE / smartevse

Smart EVSE Electric Vehicle Charging Station

94 stars 55 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Lower the charging current to 1A.

#47 legeantbleu closed 2 months ago
0
Can't get the thing charging :)

#46 Hansi3 closed 2 years ago
8
Strange behaviour

#45 rvdgaag closed 2 months ago
8
how can i build the qt4 files

#44 qasimali-byte opened 3 years ago
7
Modbus Register 0x0* broadcast: strange implementation

#43 sandervandegeijn closed 3 years ago
5
Use standard implementations for the modbus libraries

#42 sandervandegeijn closed 3 years ago
3
Add start/stop charging register to modbus implementation

#41 sandervandegeijn opened 3 years ago
2
Update README.md

#40 sandervandegeijn closed 3 years ago
1
Added RAPI interface for communication with openEVSE web front-end

#39 arjanmels opened 3 years ago
5
solar mode - start current immediately

#38 Tom9731 closed 3 years ago
1
Added support for different parity settings and YTL meter

#37 arjanmels opened 3 years ago
2
load balancing algoritme

#36 minoseigenheer closed 3 years ago
0
load balancing algoritme

#35 minoseigenheer closed 3 years ago
3
Empty if statement for PWM cycle > 92% detection

#34 arjanmels closed 3 years ago
3
Improvements

#33 Links2004 opened 4 years ago
2
allow to build with cmake using xc8 compiler

#32 Links2004 closed 3 years ago
2
How to do with solar energy?

#31 LolDeibid opened 4 years ago
3
Set PWM to 5%

#30 Fnikan opened 4 years ago
1
Support delayed charging

#29 pascalsaul opened 4 years ago
0
Charging stops for no "apparent reason"

#28 bostjanlaba closed 2 years ago
8
Config shielded with PIN

#27 laemen opened 4 years ago
4
Charging not working - red light on the car

#26 bostjanlaba closed 4 years ago
4
Control charging current directly via Modbus

#25 heisly closed 4 years ago
10
PV adjusted current by using Sensor Box

#24 mcarcog closed 4 years ago
2
MPLABX Compiler Error

#23 pierrestemmett opened 4 years ago
1
P1 data from Landis+Gyr e360 Sigle phase

#22 Fjuxx closed 4 years ago
1
Xtal frequency

#21 maximevince closed 4 years ago
2
Add Solar PV control input to vary Charging current

#20 arwooldridge opened 4 years ago
2
It doesn't change the power when "smart" Mode

#19 LolDeibid closed 4 years ago
3
Measure kWh charged

#18 HeNRGi closed 3 years ago
4
Develop

#17 bobosch closed 5 years ago
0
Add experimental modbus functions

#16 bobosch closed 5 years ago
1
Automate LCD menu generation

#15 bobosch closed 5 years ago
0
Loadbalancing not working as expected with mixed 1 and 3 phase cars

#14 barteld opened 5 years ago
6
Access Control with I/O

#13 arjannv closed 5 years ago
0
Whitespace changes

#12 jvhaarst closed 5 years ago
2
SmartEVSE 2.03 only charging at 6A in normal mode

#11 jonasf21 closed 6 years ago
1
MAINS setting limits current also in Normal mode

#10 JosDeGraeve closed 5 years ago
1
Use IO for authorization

#9 ErnieV opened 6 years ago
11
Change minimal MaxMains value to 16A

#8 lordprize closed 6 years ago
1
Minimum max mains current is too high

#7 xalerius closed 6 years ago
11
Typ2 status in serial output

#6 tho-wa closed 6 years ago
1
Charge Typ2 Mode 2

#5 tho-wa closed 6 years ago
1
cable not unlocked if charging is stopped - renault zoe

#4 tho-wa closed 8 years ago
2
Display only charging current if MODE is normal.

#3 tho-wa closed 8 years ago
2
Control charge current by solar power

#2 tho-wa closed 6 years ago
6
OCPP Implementation

#1 goRaspy closed 5 years ago
3