-
### 📑 I have found these related issues/pull requests
No issue or request like mine found
### 🏷️ Feature Request Type
Settings
### 🔖 Feature description
At the moment the webgui shows many popups…
-
Thank you for you work on this project.
We have just built and installed a NAM (NAMF-2020-43) KIT-2106 Nettigo Air Monitor (KIT 0.3.3 STD EN) - smog sensor, DIY Kit.
We have noticed that during a…
-
Why is the receiver blinking blue and orange? Im not able to find any of my sensors .
-
I propose to add a sensor block that emits a redstone signal with strength depending on the type of event. For example strength of redstone signal could be:
0 - of no events
3 - of blue moon(this ev…
-
### What happened?
The pairing instruction is not exactly correct and need to be updated.
currently it says
### Pairing
Press and hold the reset button on the device for +- 5 seconds (until the …
-
**Describe the bug**
Temperature spikes occurring in fridge monitoring sensors frequently. Extremely high temperatures occurring that range 60 degrees and above. Spike temps recorded over 3 months:
…
-
My program stops when I have a BME280 sensor connected to the board via I2C. Exactly on the command:
`bme.begin ();`
If the sensor is not connected to the board, the program works correctly, it does…
-
# インデント修正
***
## index.html
```.html
KP-IR412
p{
color:blue;
text-align: center;
font-size: 24px;
}
im…
-
The chart draws incorrectly if you end up with a negative value for unknown. This can happen if your power meter reads incorrectly, such as when you use a single sensor for a two-wire circuit with a m…
-
I recently experienced two brief power outages at my home, during which I noticed that both of my RoomSense IQ devices did not reconnect to Wi-Fi once power was restored. I suspect that this occurred …